|
After the sandblasting operation is completed we remove the sanding dust from
the parts & lay them out on steel sawhorses in the heated painting shop.
The process of priming then begins according to your print requirements. Many
types of primers & finish coats are available as we use a variety of them.
|
CLICK Images To Enlarge |
|
Removed
sandblasting dust from the racked parts ready for the painting process |
Removed
sandblasting dust from the racked parts ready for the painting process |
|
Installing access
plate |
Painting a rack
|
Some of them include 2 part epoxies, organic & inorganic zinc, urethanes & much
more
Some of our suppliers & technical support we use regularly are Sherwin Williams,
Gulf Paints, PPG, Carboline, Diamond Vogel & Tnemic.
After the parts are sufficiently dry the painting process begins. Once again,
many types and colors of paint are available & whatever finish is required we
will apply on your prints. |
|
CLICK Image To Enlarge
Ace Coatings Inc. is establishing
a true presence in the industry.
We have been heavily involved in structural steel & other related items such as
stairs, railings, etc.
We are able to perform on-site sandblasting & painting however, we are much
better suited to working on your job in our facilities under quality controlled
conditions.
Our turnaround times are second to none & of course, we apply any type of paint
you require except for powder coating as we are 'wet film' specialists.
 |
Abrasive Sandblasting |
Structural Steel |
Specialty Painting |
Paint Construction Equipment |
Oil Field Related Items |
Hand Rails & Stairs |
Tanks - Round & Frac |
Pipes & Pipe Fittings |
|
